Marine Specifications

The DAMPA^® Clip-In Tiles with sharp edge in steel or aluminium, presents a continuous, uniform and seamless ceiling surface, with precise levelling of the sharp edged tiles.

Read more about the Product here

Standard:

600 x 600 mm

Also available in:

300×300 mm.

400×400 mm.

500×500 mm.

625×625 mm.

Specially suitable for public area

Weight:

Aluminium = 2,2 – 2,4 kg/m²

(in total, average of 2,9 kg/m²)

Steel = 4,5 – 5,1 kg/m²

(in total, average of 5,2 kg/m²)

Clip-In Tile is produced in aluminium or Steel with 5 mm bevelled edge as standard.

Read more about the Product here

Standard:

600 x 600 mm

Against surcharge, available on request:

300 x 300 mm.

333 x 333 mm.

400 x 400 mm.

500 x 500 mm.

625 x 625 mm.

Primarily for indoors use

Weight:

Aluminium = 2,2 – 2,4 kg/m²

(in total, average of 2,9 kg/m²)

Steel = 4,4 – 4,7 kg/m²

(in total, average of 5,2 kg/m²)

The DCC 200/300 consists of individual demountable linear steel ceiling panels available in 200 mm or 300 mm modules. Fire and safety rates are available in B-0, (A-15), where B-15, (A-30) can be achieved with additional overlay.

Available in 26 mm. deep and 25 mm. closed groove as standard.

Read more about the Product here

Standard width:

200 mm.

300 mm.

Length from 600 to 6000 mm.

Suitable for cabins, corridors and other safety demanding areas

Weight:

DCC 200 (C-class) = 5,6 – 6,2 kg/m²

DCC 200 (B-0) = 5,6 – 6,2 kg/m²

DCC 200 (B-15) = 7,2 – 7,8 kg/m²

DCC 300 (C-class) = 5,7 – 6,7 kg/m²

DCC 300 (B-0) = 5,8 – 6,7 kg/m²

DCC 300 (B-15) = 7,8 – 8,9 kg/m²

Suspension system, average = 1,5 kg/m²

Extra inlay (12 mm) = 0,3 kg/m²

Clip-In Kassette produceres i stål eller aluminium med 5 mm faset kant som standard.

Læs mere om produktet her

Standard:

600 x 600 mm

Produceres i specielle mål mod tillæg:

300 x 300

333 x 333

400 x 400

500 x 500

625 x 625

Generelt indendørs

Clip-In Tile is produced in aluminium or Steel with 5 mm bevelled edge as standard.

Read more about the Product here

Standard:

600 x 600 mm

Also available in:

300 x 300

333 x 333

400 x 400

500 x 500

625 x 625

Primarily for indoor use.

DAMPA^® DCC 3000 has a pencil line joint between panels. 

The Panels are installed from underneath perimeter supports into standard DAMPA^® DCC 300 System.

Installation achived by means of standard Carrier No. U16 – supported by means of Suspensions No 1/3 – Rod clip No 2. (Threaded  Rod M8 ( Length according to build in height of Ceiling))

Read more about the Product here.

Standard width:

300 mm.

Length from 600 to 5000 mm.

(Lengths less than 600, and up to 5000 mm can be made to order)

Suitable areas such as corridors, cabins and other safety demanding areas

Clip-In Kassette med skarp produceret i stål og aluminium skaber et kontinuerligt, ubrudt og strømlinet look til loftsoverfladen ved at montere loftselementer præcist i samme niveau.

Læs mere om produktet her

Standard:

600 x 600 mm

Produceres i specielmål mod tillæg:

300×300 mm.

400×400 mm.

500×500 mm.

625×625 mm.

300×1200 mm. (kun i stål)

300×1500 mm. (kun i stål)

Generelt indendørs

Clip-In tile with sharp edge is produced in steel or aluminium. It presents a continuous, uniform and seamless ceiling surface look, with precise levelling of the sharp edged tiles.

Read more about the Product here

Standard:

600 x 600 mm

against a surcharge also available in:

300×300 mm.

400×400 mm.

500×500 mm.

625×625 mm.

300×1200 mm. (only steel)

300×1500 mm. (only steel)

Primarily for indoor use

DAMPA^® DCC 3000 C ceiling modules are sharp edged steel panel profiles with no recess groove  between panels, which create a uniform even look enhancing the ceiling surface as one unit.

Read more about the Product here

Standard width:

300 mm.

Length from 600 to 6000 mm.

Suitable for Public areas and primarily indoors.

DAMPA^® Interval Panels are an open ceiling system designed with exposed suspension carriers.The open groove between each element entail an open area from 50-80%. Various possibilities can be produced on request.

Read more about the Product here

Available in:

40x30x40 mm.
60x30x60 mm.

100x30x100 mm.
50x50x50 mm.
60x50x60 mm.

15x180x15 mm.

25x190x25 mm.

Length from 600 to 6000 mm

Suitable for Public areas and primarily indoor use

The D-100/200/300 panels are produced in aluminium and is a closed ceiling panel with 20 mm. groove. D-100/200/300 panels require minimal hanger positions due to the well-proven rigid and easily adjustable suspension principle.

Read more about the Product here

Standard width:

100 mm.

200 mm.

300 mm.

Length from 600 to 6000 mm.

Suitable for Public areas and primarily indoor use

Weigth:

D-100 = 1,5 – 1,7 kg/m²

D-200 = 1,8 kg/m²

D-300 = 2,1 – 2,2 kg/m²

Incl. suspension, average = 2,7 – 3,4 kg/m²

Extra inlay (12 mm) = 0,3 kg/m²

The D-10 panels are produced in aluminium and is specially suited for public areas.

Special for the D-10 panels is the characteristic oblique edge, which enhance the closed groove between each panel. Concealed suspension system. The panel joints form a 20 mm closed groove, which is repeated at all perimeters for building tolerances.

Read more about the Product here

Standard width:

100 mm.

Length from 600 to 6000 mm.

Suitable for Public areas and primarily indoor use

D-10 = 1,5 – 1,7 kg/m²

Incl. suspension, average = 2,7 – 3,4 kg/m²

Extra inlay (12 mm) = 0,3 kg/m²

The DAMPA^® Interval 190/10 system is a suspended marine ceiling system consisting of linear ceiling panels, with a 10 mm. open groove. Fast and efficient installation is assured, as ceiling panels are supplied ‘pre-cut’ in accordance with customer demand.

Read more about the Product here

Standard module width:

200 mm.

(190 mm. width and 10 mm. open groove)

Length from 600 – 5000 mm.

Suitable for Public areas and primarily indoor use

Weight:

3,4 kg/m²

D–20/30 panels with closed groove. As the depth of the panel is 26 mm. the panel is well braced and strong.

Read more about the Product here

Standard widths:

200 mm.

300 mm.

Specified length, from 600 to 5000 mm as standard.

Primarily for indoor use.

D-20/30 paneler med lukket fuge i stål. Eftersom D-20/30 har en højde på

26 mm, er panelet afstivet og er derved ekstra robust.

Læs mere om produktet her

Standardbredder:

200 mm.

300 mm.

Produceres til ordre i længder fra 600 til 5000 mm.

Generelt indendørs

D-10 er et lukket panelloft med 15 mm højde, skrå sider og lukket fuge på 20 mm. 

Læs mere om produktet her

Standardbredde:

100 mm.

Produceres til ordre i længder fra 600 til 6000 mm.

Generelt indendørs

Modifikationer til udendørs brug er mulig

D-10 panels with closed groove. The depth of the panel is 15 mm. and comes with oblique sides.

Read more about the product here.

Standard width:

100 mm.

Produced on order in length of 600 to 6000 mm.

Primarily for indoor use

Modification for outdoor use is possible.

DAMPA^® Interval 31/32/33 are an open ceiling system designed with exposed suspension system.The open groove between each element is 45 mm.

Read more about the Product here

Standard:

40 x 55 x 40 mm
40 x 155 x 40 mm
40 x 255 x 40 mm

Length from 600 to 6000 mm.

Suitable for Public areas and primarily indoor use

D-100/200/300 panelerne er en del af en komplet lukket loftsystem. Dette system er velegnet til både plan og buede loftoverflader. Alle typer i serien er 15 mm. høje og har 20 mm. fuge mellem panelerne som standard.

Læs mere om produktet her

Standardbredder:

100 mm.

200 mm.

300 mm.

Produceres til ordre i længder fra 600 til 6000 mm.

Generelt indendørs

Modifikation til udendørs brug er mulig

The D-100/200/300 panels are part of a complete closed ceiling system. This system is suitable for both flat and curved ceiling surfaces. All types are 15 mm high and have a groove of 20 mm between the panels as standard.

Read more about the Product here.

Standard widths:

100 mm.

200 mm.

300 mm.

Length from 600 to 6000 mm available as standard.

Primarily for indoor use.

Modification for outdoor use is possible.

DAMPA^® Interval adds minimalism to your ceiling.The open gap between the panels can be adjusted from 50-80% depending on your specification.

Read more about the Product here.

Standard:

40x30x40 mm.
60x30x60 mm.
100x30x100 mm.
50x50x50 mm.

60x50x60 mm.

15x180x15 mm.

25x190x25 mm.

Primarily for indoor use.

DAMPA^® Interval giver loftet et minimalistisk udseende. Den åbne fuge mellem panelerne kan tilpasses det aktuelle behov med åbningsgrad fra 50-80%.

Læs mere om produktet her

Standard:

40x30x40 mm.
60x30x60 mm.
100x30x100 mm.
50x50x50 mm.

60x50x60 mm.

15x180x15 mm.

25x190x25 mm.

Generelt indendørs

DAMPA^® Interval panel is a complete open ceiling system designed with a visible suspension system.The open gap between each element is 45 mm as standard, but other dimensions can be produced on request.

Read more about the Product here

Standard:

40x55x40 mm.
40x155x40 mm.
40x255x40 mm.

Primarily for indoor use.

DAMPA^® Interval paneler  er en åben loftsløsning, der er designet med et synligt ophængssystem. De åbne mellemrum mellem elementerne er 45 mm som standard, men mange andre muligheder er tilgængelige ved specialordre.

Læs mere om produktet her

Standard:

40x55x40 mm.
40x155x40 mm.
40x255x40 mm.

Generelt indendørs

DAMPA^® Sport Panel is a very strong and rigid construction. The panels are made from 0,8 mm galvanised steel. An open gap of 25 mm. between the panels creates the linear look.

Read more about the Product here

Standard width:

100 mm.

Length from 600 to 6000 mm available as standard.

Suitable for indoor areas were the need for a ceiling high resistible to damages. E.g. sport arenas, swimming pools, corridors etc.

DAMPA^® Sport paneler er baseret på en meget stærk og stiv konstruktion. Panelerne er produceret af 0.8 mm galvaniseret stål. Et åbent mellemrum på 25 mm mellem panelerne skaber et liniært udseende.

Læs mere om produktet her.

Standard bredde:

100 mm.

Produceres i længde fra 600 til 6000 mm.

Anvendelig på indendørs områder med behov for et produkt, som kan modstå skader eller stød, så som sportshaller, svømmehalller, gangarealer og lign.

D – Robust er et meget stærkt og modstandsdygtigt loftspanel.

Hvert enkelt panel fastskrues til bæreskinnerne med bolt, møtrik og specielle clips.

Læs mere om produktet her.

Bredde:

250 mm.

Produceres til ordre i længde fra 600 til 6000 mm.

Ideelt til områder som banegårde og undergrundsstationer, hvor der er behov for et stærkt panel.

Anvendelse på både loft og væg.

D-Robust is a very strong and rigid panel

Each panel is mounted to the carrier with a bolt, nut and a special clips.

Read more about the Product here.

Width:

250 mm.

Length from 600 to 6000 mm available on order

Suitable for areas with robust needs such as underground & train stations etc.

Applicable for both wall and ceilings areas.

The DAMPA^® Hook-on Marine is a B-15 self supporting ceiling system, designed specially for corridor areas. Each full sized panel can swing down separately. This gives unlimited access to above services anywhere without disturbing the fire integrity of the ceiling. no additional insulation is required.

Read more about the product here

Module width:

From 300 to 600 mm.

Length from 800 to 1435 mm.

Project design.

Primarily indoor use

Weight:

11,7 kg/m²
(based on a 1 m wide corridor)

DAMPA® Klimalofter beror på energioverførsel ved direkte køle-/ varmestråling fra loftselementet til eller fra omgivelserne, og sikrer derved et komfortabelt indeklima. 

DAMPA® Klimalofter fås her som Hook-On der giver hurtig og nem adgang til installationerne over loftet.

Læs mere om produktet her

Projektdesign

Generelt indendørs

DAMPA^® Climate ceiling is based on a cooling and heating system, were the energy is indirectly transferred to or from the surroundings. This ensures a comfortable indoor climate.

DAMPA^® Climate ceiling is available as Hook-On, which ensures an easy access to installations above the ceiling.

Read more about the Product here.

Individually designed for each project.

Mainly for indoor use.

DAMPA® Klimalofter beror på energioverførsel ved direkte køle-/ varmestråling fra loftselementet til eller fra omgivelserne, og sikrer derved et komfortabelt indeklima. 

Læs mere om produktet her

Standard:

600 x 600 mm

Kan produceres i specialmål mod tillæg:

300 x 300 mm.

400 x 400 mm.

500 x 500 mm.

625 x 625 mm.

Generelt indendørs

DAMPA^® Climate program includes DAMPA^® Clip-in Tiles integrated with cooling-/heating tubes. Unlike traditional air condition systems where a predetermined temperature is set for the room the DAMPA^® Climate Ceiling is constructed as an absorber of the heat generated from people or objects in the room.

Read more about the Product here.

Standard:

600 x 600 mm

Also available in:

300×300 mm.

400×400 mm.

500×500 mm.

625×625 mm.

300×1200 mm.

300×1500 mm.

For indoor use only.

DAMPA Spring er et nyt systemloft i DAMPA^® PLANOSTILE produktserien med stor fokus på integrering af lys og køling. Et fjedersystem sikrer ensartet montage efter hver demontage af loftspladen.

Læs mere om produktet her

Bredde:

Fra 600 mm.

Længder:

Fra 600 til 2400 mm.

Primært indendørs

DAMPA Spring is a ceiling system in the DAMPA^® PLANOSTILE product series, which focuses on the integration of lights and cooling. A spring system ensures uniform reinstallation after dismantling the tile, everytime.

Read more about the product here

Module Width:

From 600 mm.

Length:

From 600 to 2400 mm.

Mostly for indoor use.

Planostile Clip-in is a sharp edge tile with tailored dimensions.

Read more about the Product here.

Project design.

Custom size & shapes

Primarily for interior use.

Planostile Clip-In produceret i stål er skarpkantede kassetter eller elementer med skæddersyede dimensioner.

Læs mere om produktet her

Projektdesign

Specialdesign

Generelt indendørs

Tailored sizes are available from 200 mm to 1200 in length and from 600 mm to 2000 mm width. Available in Steel and aluminium.

Read more about the Product here.

Project design.

200-1200 x 600-2000 mm.

Primarily for interior use.

DAMPA^® Specialdesign er kundespecifikke løsninger, og har du et behov der ikke dækkes af vore standardløsninger, så er vi altid åbne for en dialog om netop dit specielle ønske.

Læs mere om produktet her

Projektdesign

Kundespecifikke løsninger

Generelt indendørs

DAMPA^® Custom Design are available as fully tailored sizes from 200 mm to 1200 mm in length and from 600 mm to 2000 mm width.

Available in Steel and aluminium.

Read more about the Product here

Project design.

Dimensions:

200-1200 x 600-2000 mm.

Suitable for public areas and indoor use

DAMPA Spring is a ceiling system which focuses on easy access and the integration of lights and cooling. A spring system ensures uniform reinstallation after dismantling the module, every time.

With Spring Interval you get the aesthetics of the DAMPA Interval ceiling, but you maintain the easy access of a modular ceiling.

Module Width:

From 600 mm.

Length:

From 600 to 2400 mm.

Interval dimensions:

40x30x40 mm.
60x30x60 mm. 
100x30x100 mm.
50x50x50 mm.

60x50x60 mm.

15x180x15 mm.

25x190x25 mm.

Mostly for indoor use.

DAMPA Silent Board is a robust wall panel that, with its sound-absorbing properties, is ideal for acoustic optimization in all rooms.

Read more about the product here

600×1200 mm.

600×1500 mm.

600×1800 mm. 

DAMPA Spring is a ceiling system which focuses on easy access and the integration of lights and cooling. A spring system ensures uniform reinstallation after dismantling the module, every time.

With Spring Custom you can choose to mount whichever type of ceiling you want, while you maintain the easy access of a modular ceiling. This way you don’t have to make a compromise between aesthetics or maintenance.

Module Width:

From 600 mm.

Module Length:

From 600 to 2400 mm.

Mostly for indoor use.

DAMPA Spring er et nyt systemloft med stor fokus på nem adgang og integrering af lys og køling. Et fjedersystem sikrer ensartet montage efter hver demontage af loftsmodulet.

Med Spring Custom kan du montere lige netop den type loft du ønsker, mens du beholder den nemme adgang fra et modulloft. På den måde er du ikke nødsaget til at gå på kompromis mellem æstetik og drift.

Modulbredde:

Fra 600 mm.

Modullængder:

Fra 600 til 2400 mm.

Primært indendørs

DAMPA Silent Board er et robust vægpanel, der med sine lydabsorberende egenskaber, er ideel til akustikoptimering i alle rum. 

Læs mere om produktet her

600×1200 mm.

600×1500 mm.

600×1800 mm. 

Primært indendørs

PLANOSTILE Hook-on Corridor ceiling system gives an unlimited access to above services anywhere without disturbing the fire integrity of the ceiling. Hook-on is an steel ceiling and can be produced in widths up to 1470 mm. No additional insulation is required.

Standard Colour RAL 9010.

Read more about the Product here

Module Width:

From 300 to 600 mm

Length from 800 -to 1435 mm

Project design.

Mostly for indoor use.

PLANOSTILE, Hook-On Korridor loftsystemet giver nem og ubegrænset adgang til installationer over loftet i korridorer og gangarealer. Med “easy access” funktionen svinger panelet ned, når du skal op over loftet.

Læs mere om produktet her

Bredde:

Fra 300 mm.

Længder:

Fra 800 til 3200 mm.

Primært indendørs

PLANOSTILE Hook-on ceiling system gives an unlimited access to above services anywhere without disturbing the fire integrity of the ceiling. No additional insulation is required, and ideal for larger areas.

Standard Colour RAL 9010.

Read more about the Product here.

Project design.

Mostly for indoor use.

PLANOSTILE Hook-On loftsystemet giver nem og ubegrænset adgang til installationer over loftet. Med “easy access” funktionen svinger panelet ned, når du skal op over loftet. Denne funktion opnås uden at gå på kompromis med design og integritet.

Læs mere om produktet her

Bredde:

Fra 300 mm

Længder:

Fra 800 til 3200 mm

Primært indendørs

DCC Light Upgrade LED-kit is the energy efficient version of our DCC Light fitting.

Upgrade existing tube based light fitting in fluorescent (2x18w; EL-0,1,3) to LED. Light source included for LED.

Read more about Built-in lighting here.

LED Tubes:
300 x 600 mm – 2x10w, EL-0,1,3 = 5,9 kg
300 x 1200 mm – 2x19w, EL-0,1,3 =

10,2 kg

For indoor use.

LED tube effect:
2x10w – 2×825 Lm (Lumen)
2×19 – 2×1560 Lm

LED light source included.

DCC Light fitting is a well-known light fitting for all areas, including corridors and other areas with fire safety demand.

Common for all DCC light fittings is that they are available in RAL 9010 as a standard. Other colours can be produces as make-to-order.

Tube based light fitting in fluorescent as standard or upgrade to LED. Light source included for LED.

Read more about Built-in lighting here.

Modules:
Fluorescent tube:
300×300 mm – 2x11w, 50/60hz, EL-0 = 4,5 kg
300×300 mm – 1x60w, 50/60hz, EL-0 = 3,4 kg
300×600 mm – 2x18w, 50/60hz, EL-0,1,3,6 = 5,9 kg
300×1200 mm – 2x36w, 50/60hz, EL-0,1,3,6 = 10,2 kg

LED tubes:
300×600 mm – 2x10w, EL-0,1,3 = 5,9 kg
300×1200 mm – 2x19w, EL-0,1,3 = 10,2 kg

For indoor use. Suitable for all areas, including corridors and other areas with fire and safety demand.

Fluorescent tube:
Not included

LED tube:
2x10w – 2×825 Lm (Lumen)
2×19 – 2×1560 Lm

DAMPA LED Linelight is an aluminium profile, diode based LED light fitting with a diffuse cover, fit for C-class rated public areas. The length is 2000 mm and is mounted with LED strips.

Light source included.

Read more about Built-in lighting here.

Standard:
16×600 mm – EL-0,6 or EL-24V = 0,9 kg
16×1200 mm – EL-0,6 or EL-24V = 1,8 kg

Custom:
Length from 100 to 3000 mm. on request

Suitable for public areas. Install in DAMPA^® Interval and other Panels.

Effect:

16×600 – 1728 Lm (Lumen)

16×1200 – 3476 Lm

Integrate decorative light fittings designed to fit the metal ceiling. DAMPA^® offer a broad variety of designs, all fire rated suitable for C-class suitable areas, such as public areas on-board.

B-0/B-15 fire rate is possible in when applied with DCC 200/300 Panels.

LED light source is included.

Read more about the Products here.

Available in:

Ø75 mm. – 3w 

Ø110 mm. – 6w 

Ø135 mm. – 9w

Ø160 mm. – 12w

Ø185 mm. – 15w

Ø210 mm. – 18w

Ø285 mm. – 24w

Ø590 mm. – 36w

Ø590 mm. – 48w

For indoor use. Suitable for all areas including Public areas and other areas with C-class fire rate demand.

B-15 fire rate is possible when installed with DCC 200/300 Panels and 40 mm. fire batts (density 130 kg/m³).

Effect:
3w – 210 Lm (Lumen)
6w – 420 Lm
9w – 630 Lm

12w – 840 Lm

15w – 1050 Lm

18w – 1250 Lm

24w – 1680 Lm

36w – 2500 Lm

48w – 3400 Lm

DAMPA^® DCC Slim LED Light Fittings are Diode based LED light fitting, which fulfil B-0/B-15 fire rate and have been fire tested as an integrated part of the DAMPA^® DCC 300 Ceiling System.

LED light source included.

Read more about Built-in lighting here.

Module:
70×600 mm. – 16w, EL-0,6 or EL-24V = 3,7 kg

For indoor use. Suitable for corridors and other areas with fire and safety demands

LED diode effect:
16w – 1250 Lm (Lumen)
32w – 2500 Lm

LED Clip-In Light panel is a diode based LED light fitting designed to fit into DAMPA Tiles.

Integrate decorative light fittings designed to fit the metal ceiling. DAMPA offer a broad variety of designs, all fire rated suitable for C-class suitable areas, such as public areas on-board.

Excellent efficiency rates of 42 Watt and lifespan of 50.000 hours.

Light source included.

Read more about light fittings here.

Standard:

600×600 mm. – 36w, EL-0,6 or EL-24V = 3,48 kg

On request also available in:

300×300 mm. – 18w, EL-0,6 or EL-24V

For indoor use. Ideal for Public areas.

Effect:
300×300 – 1620 Lm (Lumen)
600×600 – 3240 Lm

PLANOSTILE Lay-In, tidligere kendt som Bandraster er et panel i stål, som giver et utal af design- og stylingmuligheder til kant og samlingløsninger.

Læs mere om produktet her

Bredde:

Fra 300 mm.

Længder:

Fra 800 til 3200 mm.

Primært indendørs

PLANOSTILE, Lay-in panel is an steel ceiling system, which gives unlimited possibilities to stylish edge and joints design.

Standard Colour RAL 9010.

Read more about the Product here

Standard width:

50-100 mm

Project design.

Mostly for indoor use.

DAMPA^® Sport Wall Solution is a very strong and rigid wall construction. The units are made from 0.8 mm galvanised steel. An open gap of 25 mm between the units creates the linear look and draws attention to the deep square-edged steel profile.

Read more about the Wall Solutions here

Read more about the DAMPA ^® Sport Panels here

Standard width:

100 mm.

Length from 600 to 6000 mm. available.

Suitable for indoor areas with robust needs such as sport arenas, swimming pools etc.